Product overview
Laser power meter
The laser power meter is designed using the latest embedded technology with the starting point of high-quality core component calorimetric probes, the concept of simplicity, ease of use, and reliability, and the original intention of providing the best products for the industry. With high quality and cost-effectiveness, it is the best choice for laser power measurement. It is suitable for handheld measurement and also suitable for online measurement with the whole machine.
Features
Probe:
Quick response
(50W probe, with meter 0%-95% response time: 1.5 seconds)
Extremely high damage threshold
Wavelength range: 0.19-11um
Calibration NIST traceability
Compact appearance, built-in fan, and no external power supply required
Optimized heat sink design, high carrying power
(50W probe: continuous measurement of 50W, intermittent maximum of 150W)
Square probe, easy to integrate and can be easily installed on the equipment
Optical accessory mounting threads
Omnidirectional adjustable bracket
Header:
High-resolution color TFT screen, two-level backlight
Micro-USB interface for charging, power supply, and data upload
Supports ordinary mobile phone data cables and chargers
Provides one standard RS232 interface output
Lithium-ion rechargeable battery, power-off working time >=14 hours
Full metal body, light weight
No need for zero calibration (adopting floating self-stabilizing zero circuit)
Automatic range switching (AutoScale)
User-defined correction coefficient
Patented adjustable Acc algorithm
Baking machine protection, the ideal companion for laser research and development
(Monitor the power in real time and shut down the laser if abnormality occurs)
Non-volatile data recording, up to 10,000 points
High-precision 12bit analog output
Real-time waveform display, time adjustable
Easy-to-use menu and shortcut key mechanism
Anti-electromagnetic interference
Suitable for application:
Handheld measurement
Equipment online measurement
Parameters Table
Power supply Micro-USB
Power adapter 5V1A
Battery Features 2400mAh lithium-ion rechargeable battery
Battery charging time: about 9 hours
Battery discharge time: about 14 hours
Probe maximum power density 15kW/cm^2; effective accuracy 0.01W
0-95% response time 1.5 seconds (50W probe)
Electrical measurement accuracy ±0.2%
System measurement accuracy ±2%
AD resolution 16Bit
AD sampling speed 10Hz
Analog output 0-1V: 0-maximum power; number of digits: 12bit; accuracy: ±0.2%; output impedance: 100 ohms
Alarm output OC door, maximum load capacity 0.35A
Storage points: up to 10,000
Storage time up to 1667 hours
Remote control port USB communication*1; standard RS232*1; Note: Other devices can receive data sent by the power meter USB and RS232 at the same time, but cannot send data to the power meter through both interfaces at the same time.
Display mode numbers, bar graphs, curves
Power meter head size length x width x depth: 170*96*28 (mm)
Display 2.8-inch true color LCD, 400*240 pixel
Backlight two levels adjustable
Shell material: lightweight metal
Net weight 500g
FAQ:
Q: Which laser source can be measured with this powermeter?
A: Fiber laser, CO2 laser, UV laser.
Q: Fiber laser, what is the maximum power meter that has been measured?
A: The maximum 60W is no problem, but it is recommended not to measure it beyond the range. Occasionally, it is not a big problem to exceed it a little bit.
Q: CO2 laser, what is the maximum power meter that has been measured?
A: CO2 laser beam has a lot of heat. It is recommended not to exceed the range, within 50 watts.
Q: For UV laser, what is the maximum power meter that has been tested?
A: 50W
Laser power meter can measure the MAX 50 watt power of fiber laser, CO2 laser and UV laser. Wavelength range: 190-11000nm.
